Hallo Uwe,

Ich habe Alan (forenteilnehmer aus Kalifornien) mal gefragt.

Er schrieb folgendes:

"He could not pick a worse circuit to have a problem with. F13 provides power to a lot of things.

Does the fuse blow only when the G is moving? If so, then it is most likely a wire that is shorting against the body as he expects. Very hard to find. I have had success by taking out the fuse and wiring a 12V brake light into the circuit. Then drive / play with the wires until the light flickers.

If that takes too long. There is a wire from the F13 to a junction where several wires meet. Break that apart and put a separate 7.5A fuse on each wire. Then the next time the fuse blows the rest of the circuit will still work, and he will know better where to look.

If the short becomes permanent, then one can replace the fuse with a 12V bulb (see above) and use a thermal imaging camera to see the warm wire. Very easy, but the short has to be 100% on.

...Alan"


Aber er wird sich bestimmt nochmal persönlich hier melden.

Mit freundlichen Grüßen

www.martinamario.de